Southern pulpwood production, 2017

Abstract

The Forest Inventory Analysis (FIA) unit of the Southern Research Station annually compiles, analyzes, and reports canvass data of pulpmills in the South. This report for 2017 presents the findings of a 100-percent canvass of pulpmills that used roundwood or wood residues from the 13 Southern States. Of the 77 mills canvassed, 60 responded. For the 17 mills that did not respond, previous canvass data and other sources of information were used for the findings reported in this publication. Regional conversion factors were used to convert mill data reported in nonstandard units to standard cords. The report gives all production figures in cords. Tables A.1 and A.2 of the report express equivalent green tons of production. Unless otherwise indicated, the context for production comparisons (increases, decreases, or stabilizations) throughout the report is the change from 2016 to 2017.

  • Citation: Gray, James A.; Bentley, James W.; Cooper, Jason A.; Cyprian, Larry T.; Wall, David J. 2021. Southern pulpwood production, 2017. Resour. Bull. SRS–228. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 13 p.
  • Keywords: FIA, pulpmills, pulpwood, residues, roundwood
  • Posted Date: February 17, 2021
  • Modified Date: September 8, 2021
  • Print Publications Are No Longer Available

    In an ongoing effort to be fiscally responsible, the Southern Research Station (SRS) will no longer produce and distribute hard copies of our publications. Many SRS publications are available at cost via the Government Printing Office (GPO). Electronic versions of publications may be downloaded, printed, and distributed.

    Publication Notes

    • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
    • Our online publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS webmaster if you notice any errors which make this publication unusable.
    • To view this article, download the latest version of Adobe Acrobat Reader.