Browse Units


Southern
Research Station

Contact Information

Southern
Research Station
200 W.T. Weaver Blvd.
Asheville, NC
28804-3454
(828) 257-4832
(828) 259-0503 TTY

Publication Information

 Evaluate this publication
How Do You Rate This Publication?  Bookmark and Share       Mail this page

Title: An investigation of selected factors that influence hardwood wettability
Author(s): Shupe, Todd F.; Hse, Chung-Yun; Wang, Wan H.
Date: 2001
Source: Holtzforschung 55(5):541-548
Description: Wettability of sanded and non-sanded transverse and tangential sections of 22 southern hardwoods species was judged by measurement of contact angles using phenol formaldehyde resins. As expected, contact angle values on transverse sections were higher than those on tangential sections for both sanded and non-sanded surfaces. On sanded surfaces, hackberry had the highest mean contact angle (64.7°), and black oak had the lowest mean contact angle (50.1°). On non-sanded surfaces, winged elm had the highest mean contact angle (59.1°), and sweetgum had the lowest mean contact angle (45.9°). In addition, 4 of the 22 species (southern red oak, sweetgum, white oak, and post oak) were selected to investigate the effect of oven-drying, air-drying, and free-drying on wettability. The mean transverse contact was 2.1°-29.0° and 5.l°-31.5° higher than radial and tangential values, respectively. The contact angle pattern typically displayed for a given species and plane was generally oven-dry > air-dry > freeze-dry. The species pattern for most methods and planes was: sweetgum > white oak > post oak > southern red oak. White oak and post oak have similar contact angle values.
View and Print this Publication (2.6 MB)     Evaluate this publication
Publication Notes: We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain. Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable.
[ Get Acrobat ] Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility