Publication Information
| Title:
| Continuous tunnel kiln direct-fired with bark to dry 1.75-inch southern pine in 12 hours. |
| Author(s): |
Koch, P.; Wellford, W.L. |
| Date: |
1977 |
| Source: |
Forest Products Journal 27(5):39-47 |
| Description: |
Length-sorted lumber is surfaced on one side to 1.75-inch thickness, mechanically stacked 5 feet wide and 10 feet high on 1-1/4-inch-thick sticks, and continuously transported through a zone-controlled tunnel kiln at 8 ft./hr. to yield 500,000 fbm of lumber dried to 9 percent average MC per 168-hour week. In the tunnel, the lumber is dried for 8 (possibly 10) hours at 270°F, conditioned for 3 hours at 195°F, and cooled for 1 hour before discharge to cooling sheds and subsequent unstacking. During drying and conditioning, wetbulb temperature is held constant at 185°F. Air velocities
vary by zone; i.e., 1,600 fpm at inlet, 300 fpm while conditioning, and 1,000 fpm while cooling. To control warp, a top load (12 in. of concrete) is automatically placed on the moving lumber stacks as they enter the tunnel kiln and removed as they exit. |
 |
View and Print this Publication (2.1 MB) |
Publication Notes: |
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some
typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable.
|
![[ Get Acrobat ]](/images/getacro.gif) |
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility |