Browse Units


Contact Information

Southern
Research Station

200 W.T. Weaver Blvd.
Asheville, NC
28804-3454
(828) 257-4832
(828) 259-0503 TTY

Publication Information

 Evaluate this publication
How Do You Rate This Publication?
  Bookmark and Share       Mail this page

Title: Effect of adhesive stiffness and thickness on stress distributions in structural finger joints
Author(s): Groom, Leslie H.; Leichti, Robert J.
Date: 1994
Source: J. Adhesion 44:69-83
Description: Environmental, political, and socioeconomic actions over the past several years have resulted in a decreased wood supply at a time when there is an increased demand for forest products. This combination of increased demand and decreased supply has forced more emphasis on engineered wood products, a varied category usually connected with adhesively-bonded end joints, of which the most common type is the finger joint. This paper presents the results of a finite-element analysis of structural finger joints, and focuses primarily on the effect of adhesive stiffness and thickness on stress distribution patterns in finger joints. Results indicate that a flexible adhesive layer concentrates adherend longitudinal and radial stresses at the finger base, whereas a stiff adhesive layer minimized adherend stresses but increases adhesive stress levels. Results also show that a thin adhesive layer concentrates longitudinal adherend stresses at the juncture of the finger tip and flexible finger base and concentrates radial stresses at all finger bases. However, these increased longitudinal and radial stresses are balanced by reduced adhesive shear stresses.
View and Print this Publication (1.4 MB)     Evaluate this publication
Publication Notes: We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain. Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable.
 [ Get Acrobat ] Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility