Title:	Wildfire fuel harvesting and resultant biomass utilization using a cut-to-length/small chipper system
Author(s):	Bolding, M. Chad; Lanford, Bobby L.
Date:	2005
Source:	Forest Products Journal, Vol. 55(12): 181-188
Description:	Currently, there is a lack of information concerning mechanical forest fuel reduction. This study examined and measured the feasibility of ground-based mechanical harvesting to reduce forest fuel buildup and produce energywood. Cut-to-length (CTL) harvesting coupled with a small in-woods chipper provided a low impact way to harvest pre-commercial trees and tops along with merchantable logs. While CTL harvesting systems have been used successfully with full-sized chippers, it required two or three CTL teams to meet volume requirements. A smaller, less expensive chipper allowed operations to stay small and more efficient. Productivity and cost results showed the system to be capable of harvesting non-merchantable trees and utilizing non-merchantable portions of merchantable-sized trees as energywood chips, which in the past have been normally left in the woods unutilized. The gain from the values of energywood chips and merchandized logs makes the system economically attractive, not to mention the fuel reduction gains received by potentially altering future fire behavior.
	View and Print this Publication (1.95 MB)
Publication Notes:	We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information. This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain. Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable.
	Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility