McSweeny, James D., Roger M Rowell, George C. Chen, Thomas L. Eberhardt, and Soo-Hong Min. “Removal
of heavy metals from water with forest based materials.” Preprints of Extended
Abstracts Presented at the 232nd ACS National Meeting. September 10-14,
2006. San Francisco, CA (2006) 46 (2): 283-288.
Pu,
Yunqiao, Jianguo Zhang,
Thomas Elder, Yulin Deng, Paul Gatenholm,
and Arthur J. Ragauskas. “Investigation into nanocellulosics
versus acacia reinforced acrylic films.” Composites Part B: engineering.
(2006): 360-366.
Shupe, Todd F., Chung Y. Hse, and Han Roliadi. “Removal of creosote from wood particles at different horizontal
and vertical locations of decommissioned poles using steam treatment.”
Wood and Fiber Science (2006) 38 (2): 345-350.
So, Chi-Leung, Thomas L. Eberhardt, Stan T. Lebow, and
Leslie H. Groom. “A preliminary study of preservative
retention and penetration in ACQ-treated timbers using near infrared
spectroscopy.” Wood Protection 2006 Technical Forum
Presentations. March 21-23, 2006. New Orleans, LA. 367-370.
So,
Chi-Leung and Thomas L. Eberhardt. “Rapid analysis of inner and outer bark composition
of southern yellow pine bark from industrial sources.” Holz
als Roh-
und Werkstoff (2006) 64: 463-467.
Groom, Les,
Yan Yu, Chi-Leung So, Thomas Elder, and Thomas Pesacreta. “Effect of refining on the structural integrity of wood fibers.”
(2006) Proceedings of the 8th Pacific Rim bio-Based Composites Symposium: Advances and Challenges in Biocomposites. November 20-23, 2006. Kuala Lumpur, Malaysia. 367.
Elder,
Thomas, Nicole Labbé, David Harper, and Timothy Rials. “Time domain-nuclear magnetic resonance study of chars from
southern hardwoods.” Biomass and Bioenergy
(2006) 30: 855-862.
Eberhardt, Thomas L. and Karen G. Reed. “Strategies for improving the performance of plywood adhesive mix
fillers from southern yellow pine bark.” Forest Products Journal (2006) 56
(10): 64-68.
Eberhardt, Thomas L., and Soo-Hong
Min. “Polymer-treated woody biomass: a filtration medium for removing phosphate
from water.” Environmental Science and Technology (2006) 1:
287-292.
Piao,
Cheng, Todd F. Shupe, R. C. Tang, and Chung Y. Hse.
“Mechanical properties of small-scale laminated wood composite poles: effects
of taper and webs.” Wood and Fiber Science (2006) 38 (4): 633-643.
Via, Brian
K., Lori G. Eckhardt, Chi-Leung So, Todd F. Shupe, Leslie H. Groom, and Michael Stine. “The response of visible/near
infrared absorbance to wood-staining fungi.” Wood and Fiber Science
(2006) 38 (4): 717-726.
Lee, Sangyeob, Todd F. Shupe, Leslie
H. Groom, and Chung Y. Hse. “TMP fiber surface modification for
enhancing the interfacial adhesion with polypropylene.” Wood and Fiber Science (2006).
Gao, Heng, Todd F. Shupe, Chung Y. Hse, and Thomas L. Eberhardt. “Antioxidant activity of extracts from the bark of Chamaecyparis lawsoniana
(A. Murray) Parl.” Holtzforschung (2006) 60: 459-462.
Lee, S., T.
F. Shupe, and C. Y. Hse. “Mechanical and physical properties
of agro-based fiberboard.” Holtz als
Roh- und Werkstoff (2006)
64: 74-79.
Eberhardt, Tom, Soo-Hong Min, and James S. Han. “Phosphate Removal by refined aspen wood fiber
treated with carboxymethyl cellulose and ferrous
chloride.” Bioresource Technology 97 (2006):
2371-2376.
Eberhardt, Thomas L., Chi-Leung So, Amy H. Herlihy,
and Po-Wah So. “Use of Gadolinium Chloride as a Contrast
Agent for Imaging Spruce Knots by Magnetic
Resonance.” Wood and Fiber Science 38 (3) (2006): 527-34.
Gadhe, Jayant B., Ram B. Gupta, and Thomas Elder. “Surface Modification of Lignocellulosic
Fibers Using high-
Frequency Ultrasound.” Cellulose 13 (1) (2006): 9-22.
Zheng, Dang, Thomas Elder, and Arthur J. Ragauskas. “Influence of Kraft Pulping on Carboxylate Content of Softwood
Kraft Pulps.
“Industrial and Engineering Chemistry Research 45(13) (2006): 4509-16.
So, Chi-Leung, Thomas L. Eberhardt, Stan T. Lebow, Todd F.
Shupe, and Leslie H. Groom. “Analysis of ACQ and
CBA Treated Wood by Near Infrared
Spectroscopy.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest Products Society, 2006. 42.
Pan, Hui, Todd F. Shupe, and Chung-Yun Hse. “Effects of Liquefication
Conditions on Liquefied Wood Residues.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest Products Society, 2006. 32.
Lee, Sangyeob, Todd F. Shupe, Leslie
H. Groom, and Chung-Yun Hse. “Interfacial and Fracture
Properties of Maleated
Polypropylene film and Wood Fiber Handsheet
Laminates.” Biographies & Abstracts Forest Products Society
60th International Convention. Madison, WI: Forest Products Society, 2006. 31.
Gao, Heng, Todd F. Shupe, Thomas L. Eberhardt, and Chung-Yun Hse. “Antioxidant Activity of Extracts
from the Wood and Bark of Port-Orford-Cedar.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest Products Society, 2006. 31.
Pan, Hui, Todd F. Shupe, and Chung-Yun Hse. “Synthesis and Cure Kinetics of
Liquefied Wood/Formaldehyde Co- Condensed Resin.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison,
WI: Forest Products Society, 2006. 34.
Lee, Sangyeob, Todd f. Shupe, and
Chung-Yun Hse. “Thermoset Adhesives as Compatibilizers at the Isotactic
Polypropylene (iPP) and Thermomechanical Pulp
(TMP) Fiber Interface.” Biographies & Abstracts Forest
Products Society 60th International Convention. Madison, WI: Forest
Products Society, 2006. 34.
Hse,
Chung-Yun, Todd f. shupe,
Cheng Piao, and R. C. Tang. “Tapered Wood Laminated Composite Poles with
Biomimickry
features.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest Products Society, 2006. 27.
Piao,
Cheng, Todd f. Shupe, Chung-Yun
Hse, and R. C. Tang. “Finite Element Analysis of Tapered Wood Laminated
Composite Poles with Biomimicking features and Gluelines.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest Products Society, 2006. 27.
Tang, R.
C., Cheng Piao, Todd F. Shupe,
and Chung-Yun Hse. “Effect of Juvenile-Mature Wood
Ratio on the Bending
Performance of Southern Pine Poles.” Biographies & Abstracts Forest Products Society 60th
International
Convention. Madison, WI: Forest Products Society, 2006. 19.
Shupe, Todd F., Chung-Yun Hse, Cheng Piao, Hui Gao, R. C. Tang, W. James Catallo, Doug Arnold, Joe Elder, Mark D. Gibson,
George A Grozdits, Richard P. Vlosky,
and Allen W. Nipper. “Closed-Loop Preservative Treated
Wood Recycling Program.” Biographies & Abstracts Forest Products Society 60th
International Convention.
Madison, WI: Forest Products Society, 2006. 16 and 42.
Lee, Sangyeob, Todd F. Shupe, Leslie
H. Groom, and Chung-Yun Hse. “Argon- and Oxygen-Based Plasma Treatment
Effects at the Thermomechanical Pulp Fiber and Isotactic Polypropylene Interface.” Biographies
& Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest Products Society, 2006. 16 and 33.
Pan, Hui, Todd F. Shupe, and Chung-Yun Hse. “Characterization of Liquefied Wood
Residues from Different
Liquefication Conditions.” Biographies & Abstracts Forest Products Society 60th
International Convention.
Madison, WI: Forest Products Society, 2006. 8.
Elder,
Thomas, Leslie H. Groom, Rick French, and Dana Nelson. “Gasification of Understory Removals and Hurricane Katrina Debris.” Biographies & Abstracts Forest Products Society 60th
International Convention. Madison, WI: Forest
Products Society, 2006. 5.
Shupe, Todd F., Leslie H. Groom, Thomas L. Eberhardt,
timothy g. rials, Chung Y. Hse,
and Thomas Presecreta.
“Mechanical and
Physical Properties of Composite Panels Manufactured from Chinese tallow Tree
furnish.” Forest Products Journal. 56(6) (2006): 64-67.
Labbe’, Nicole, David Harper, Timothy rials, and
Thomas Elder. “
Chemical Structure of Wood Charcoal by infrared
Spectroscopy and Multivariate Analysis.” Journal of
Agricultural and Food Chemistry. 54 (2006): 3492-97.
Gao, Heng, Todd F. Shupe, Chung Y. Hse, and Thomas L. Eberhardt. “Antioxidant Activity of Extracts from the Bark of Chamaecyparis Lawsoniana
(A. Murray) Parl.” Holzforschung. 60 (2006):
459-62.
Shupe, Todd F., and Chung Y. Hse. “Recycling of Preservative-Treated
Wood Using chemical Extraction Technologies.”
Environmental Impacts of Treated Wood. Eds. Timothy G. Townsend and Helena Solo- Gabriele. Boca Raton: CRC Taylor & Francis Group, 2006. 383-400. Chapter 21.
Hou, Q. X., Chai,
X. S., Yang, R., Elder, T., and Ragauskas, A. J.
2006. Characterization of Lignocellulosic-Poly(lactic acid)
Reinforced Composites. Journal of Applied Polymer Science, 2006; 99: 1346-1349.
Lee, S. Y., Shupe, T. F.,
and Hse, C. Y. 2006. Properties of bio-based medium
density fiberboard. Proceedings: Recent developments in the
particleboard, fiberboard, and molded wood products industry. Forest Products Society. Madison, WI. 51-58.
Piao, C.., Shupe,
T. F., and Hse, C. Y. 2006. Dynamic control of moisture during
hot pressing of wood composites. Proceedings: Recent developments
in the particleboard, fiberboard, and molded wood products industry. Forest Products Society. Madison, WI. 27-40.
Lee, S. Y.,
Shupe, T. F., Groom, L. H., and Hse,
C. Y. 2006. Heterogeneous
nucleation of a semicrystalline polymer on fiber
surfaces. Proceedings: Recent developments in the particleboard,
fiberboard, and molded wood products industry. Forest Products Society. Madison, WI. 91-97.
